Looks to be in excellent condition, tested and offered with a 30 day warranty. Includes system, power supply (US/Canada), terminal plug, cable tester, printed manuals, and original box.

Local downsizing consignment.


DCS50 Features:

Simple to use controls for running trains.

Large speed control knob and direction switch with brake.

Full numeric key pad.

Easy 2 and 4 digit addressing.

Smooth speed control.

Run multiple trains at once without blocking!

Run up to 10 addresses at the same time on your system.

Run up to 10 throttles at the same time on your system.

Jump Ports for using DC power packs as additional throttles

Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.

Simple, cost effective way to add more throttles to your Zephyr set.

Makes it easy to share the fun of DCC with layout visitors and young operators.

Functions on locos controlled by Jump throttles remain active.

Over 9000 Locomotive Addresses

Use Address 00 to run one or more locos without DCC decoders

Two Digit Addressing is easy to use. (Address 01-127)

Four Digit Addressing-use the number painted on your engines as its address.

2.5 Amps of Power to run multiple trains.

Booster outputs 12V for safe operation in N and HO scales.

Function Control

Control 10 functions-F0 through F8.

Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).

Stationary Decoders, Turnout Control & Turnout Position Reporting

Access to stationary decoder control for turnouts and other devices.

Control 999 stationary decoder addresses.

Consisting

Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.

Advanced consisting, allows only advanced consist capable mobile decoders.

Basic consisting, program decoders to run on same address.

Decoder Programming

Built in read/write programmer that can read and write all CVs.

Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.

Operations mode programming can be used to program decoders on the layout.

Expandability with Digitrax LocoNet

Use Zephyr as a starting point for your Digitrax LocoNet System, then add components.

Use Zephyr as an expansion set with Digitrax equipment you already have installed.

Add Radio or IR via LocoNet. Just plug in a UR90 or UR91 receiver and add IR and/or Radio throttles.