1.0 Amp/2 Amps Peak
4 FX3 Functions, 200ma output

Drop-in light board replacement decoder for Kato “K2” form-factor boards, allows decoder to be moved between different locomotives.
Series 7 Enhanced Decoder Features.
XF expanded function capability, allows user remap of function keys 0-28 to function output leads.
Firmware may be user updated using a Digitrax USB equipped Command Station with Sound Loader software in decoder IPL mode.
4 Digitrax FX3 Functions-Control lights and functions for prototypical lighting effects and on/off control.
Configurable FX3 Pulse Function available on all function outputs.
On board white leds for headlights.
Digitrax LocoMotion® System – Lets your trains run like the real thing!
2 Digit and 4 Digit Addressing.
Basic, Advanced & UniVersal Consisting.
SuperSonic motor drive for silent operation.
Direct and Operations Mode programming.
Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment. Decoder Reset by CV8.
Transponder Equipped ready for transponding ID on your layout.
Power-on Motor Isolation Protection, helps prevent damage to your decoder.
DCC Compatible.
FCC Part 15, Class B RFI compliant.
Operates on DCC track voltage typical 9V minimum. to 22V maximum.

1 DN147K2 Kato “K2” style light board replacement decoder,
1 Instruction Sheet

CAUTION: This “K2” form factor decoder fits many older legacy Kato N-locomotives. More recent versions of the same shell/locomotive type may require a different decoder. Check before purchasing.