1.0 Amp/2 Amps Peak
4 FX3 Functions, 200ma output

Drop in “A1” Atlas light board replacement decoder. Allows decoder to be moved between different locomotives with typically no soldering.
Series 7 Enhanced Decoder Features.
Series7 decoder firmware may be user updated using a Digitrax USB equipped Command Station with Sound Loader software or equivalent in decoder IPL mode.
4 Digitrax FX3 Functions-Control lights and functions for prototypical lighting effects and on/off control.
Configurable FX3 Pulse Function available on all function outputs.
Digitrax LocoMotion® System – Lets your trains run like the real thing!
2 Digit and 4 Digit Addressing.
Basic, Advanced & UniVersal Consisting.
SuperSonic motor drive for quiet operation.
Direct and Operations Mode programming.
Program CVs with Digitrax Command Control, or compatible DCC system.
Decoder Factory Reset by writing CV8, with or without speed table reset.
Transponder Equipped ready for transponding ID on your layout.
Power-on Motor Isolation Protection, helps prevent damage to your decoder.
DCC Compatible.
FCC Part 15, Class B RFI compliant.
Operates on DCC track voltage 9V minimum. to 22V maximum.

1 DN147A1 compact 1 amp Atlas light board decoder
1 Instruction Sheet

CAUTION: This “A1” form factor decoder fits some older legacy Atlas locomotives. More recent versions of the same shell/locomotive type may require a different decoder. Check before purchasing this version.